GLOBAL PRESENCE UAE ME ASIA
CALL US ON : +971 4 279 1300
Emergency Stainless Steel Combination Shower with Hand/foot Operated eye/face wash
Removes contaminants from the body with a deluge of flushing fluid and eye/face wash units flush hazardous contaminants and irritants from eyes and facial area. Stainless steel construction provides superior durability and reliability.
  • Inlet connection : 25mm (1" BSP)
  • Minimum working pressure : 210kPa
  • Shower : Min Flow Requirements : 76 lpm (20 US gpm)
  • E/F Wash : Min Flow Requirements : 26 lpm (6.9 US gpm)
  • Waste water outlet size : 38mm (1 ½ ") OD
  • Mounting base plate : Size 150mm X 150mm with 4 bolt holes
  • Weight : 12.7 kg
Available in various colours like Green, Orange, Yellow and White
Tested for compliance to ANSI Z358.1 and AS4775
Wall Mounted Hand Operated Eye/Face Wash
Stainless steel construction provides superior durability and reliability. Stainless steel is 304 Grade.
  • Inlet connection : ½" BSP
  • Minimum Water supply line size : DN15mm (1/5") Nominal size
  • Minimum working pressure : 210kPa
  • Minimum flow requirement : 11.4 lpm
  • Waste water Outlet size : DN 40mm (1 ½" OD)
  • Weight : 4.5 kg
Available in various colours like Green, Orange, Yellow and White
Tested to comply with ANSI Z 358.1-2004 and AS/NZS 4775 : 2007.
Emergency Eye/Face wash Pedestal Mounted Hand/Foot operated
Emergency eye/face wash units flush hazardous contaminants and irritants from eyes and facial area. Stainless steel construction provides superior durability and reliability.
  • Inlet connection : ½" BSP
  • Minimum working pressure : 210kPa
  • Minimum flow requirement : 26 lpm
  • Waste water Outlet size : DN 38mm (1 ½" OD)
  • Mounting base plate : 150mm X 150mm with 4 bolt holes
  • Weight : 9 Kg
Walk On 16 Spray Heads Eye Face Platform Operated
Free standing multi - spray decontamination showers for use where hazardous substances are used. The multi - sprays ensures maximum coverage of clothing and the highest quality components ensure reliability.
  • Constructed from stainless steel for maximum durability and reliability.
  • 16 Multi-spray outlets
  • Three side panels
  • Step on shower activations
  • Hand operated eye/face wash
Gravity Fed Eyewash
  • Ideal for remote location.
  • Using gravity to supply a continuous flow of clean water to injured personnel.
  • Featuring a FDA approved high - density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position.
  • A wide - fill opening with threaded cap permits easy inspection, cleaning and filling.
Available in various capacities.
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
1500L Tank Shower With Chiller
Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use.
Designed to be highly visible for ease of identification.
These units are ideal for areas where there is no water supply; interrupted water supply; low water pressure to guarantee correct flow rate or a tepid water supply.
Suitable for Non hazardous area.
Electrical power requirement is 220 - 240v 1Ph 500Hz as standard. Suitable for temperatures -5°C to +50°C
Available in Green, yellow or white. Green being standard.
1500L Tank Shower With Atex Chiller
Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use.
Designed to be highly visible for ease of identification.
These units are ideal for areas where there is no water supply; interrupted water supply; low water pressure to guarantee correct flow rate or a tepid water supply.
Suitable for hazardous area. ATEX certified.
Electrical power requirement is 415v 3Ph 500Hz as standard. PLEASE NOTE : Any lamps or alarm & sirens fitted require a separate single phase power supply Suitable for temperatures -5°C to +50°C.
Available in Green, yellow or white. Green being standard.
Low Temperature Self Contained Shower & Eyebath
Manufactured in house, this unit is ideal for applications where there is no mains water supply.
This unit will give 15 minutes of water before the need to refill.
Where there is no drainage system to collect the water, it is important for adequate ground drainage under and around the unit especially if there is a risk of the water freezing Suitable for ATEX areas. Zone 1 & 2. Suitable for temperatures down to -40°C.